Table of Contents
Advertisement
Shutdown, reboot and startup actions
The NAS server can be shut down by pressing the power button twice at the front of the server
case. The whole shutdown process might take seconds to minutes until data are all safely
saved to the hard disks. To shut down the server from the "Administration Homepage", select
"Shutdown" from the "Server" menu and click the "Reboot" or "Shutdown" button.
You can specify the actions to take during the next startup.
Item
Recalculate user
quota information
Reset configuration
to factory default
Scheduled shutdown and power-on
To set the automatic power-on and shutdown schedules, select the "Server → Shutdown"
menu. Click the "Schedule" tab to modify the schedules. On the schedule settings page, you
can set daily or day of month schedules. Check the "Enable" check-boxes and specify the time
of powering on or shutting down. Remember to click the "Apply" button to submit the changes.
3.4 Enabling UPS Support
The NAS server supports UPS and basic power management functions. It sends alerts when
there are power events like utility power failure or low battery capacity. When power events
Recalculate the storage consumption per user during the next
startup. It may take much time if there are a huge amount of files in
disk.
Reset all configurations to default.
Description
21
Advertisement
Table of Contents
