Table of Contents
Advertisement
HDD Access LED
Red on
during access
Red on
Off
Off
Off
Power Jack
Interface
Power Jack
e-SATA
RS-232
LAN Jack (LAN1)
LAN Jack (LAN2)
USB Socket
PCI-E Port (optional)
HDD ready LED
Green Blinks
Green Blinks (FAST)
Amber on
Amber Blink (Slowly)
Off
NAS-7850 Rear View
RS-232
e-SATA
Connect the two power supply cord shipped with the system
Connect to External hard drive case
Connect to UPS
These RJ-45 ports support auto negotiating Fast Ethernet
10/100/1000 Base-TX networks. That allows your system to be
connected to an Internet Access device, e.g. router, cable
modem, ADSL modem, through a CAT.5 twisted pair Ethernet
cable.
Connect to UPS and external HDD(FAT/FAT32)
Connect to Tape Backup or Tape Library or Network card
Description
Power is being accessed
RAID building, rebuilding, expending
Volume un-mounted and HDD is ready for
being hot-unplugged
Disk fault Blinking interval is 2 second
Hard disk is absent or SATA
cable is not connected
USB
LAN Jack
Description
PCI-E
10
Advertisement
Table of Contents
