1. Click "iSCSI" tab and Click "Add" to create an iSCSI target on the NAS.
2. Enter the iSCSI target information for configuration
Item
Target User Name
iSCSI Target Lun
Comment
iSCSI
Authentication
Target User Name
Password
Mutual CHAP
Initiator Name
Password
CRC/Checksum
3. Apply the settings. Now, an iSCSI LUN is a logical volume mapped to the iSCSI target. The
target and LUN are shown on the list under the "iSCSI" tab.
The NAS supports 8 iSCSI devices at maximum.
Note:
4. The LANs created can be mapped to and unmapped from the iSCSI target anytime. You can
deactivate or activate by clicking
clicking
icon.
The name for the target.
Select to create an iSCSI target with a mapped LUN and enter the
size of LUN
The comment for the target.
None or CHAP
The name for target authentication
The password for target authentication
Two-way authentication mode
The name for initiator authentication
The password for initiator authentication
Data or Header Digest
or
icon, respectively. You can delete a target by
Description
47