Table of Contents
Advertisement
For NAS-7450 rack mount model:
1. Identify which hard disk fails. The amber LED2 will blink to indicate hard disk failure.
2. Unplug the HDD tray and replace the HDD with a good one.
3. Plug in the HDD tray. Wait until the Green LED is steady on.
Then you are done.
5.9 iSCSI
iSCSI, (Internet Small Computer System Interface), an Internet Protocol (IP)-based storage
networking standard for linking data storage facilities. By carrying SCSI commands over IP
networks, iSCSI is used to facilitate data transfers over intranets and to manage storage over
long distances. iSCSI can be used to transmit data over local area networks (LANs), wide area
networks (WANs), or the Internet and can enable location-independent data storage and
retrieval.
Follow the steps below to configure the iSCSI target service on the NAS
server.
46
Advertisement
Table of Contents
