Touchtone Phone - Interlogix Concord 4 User Manual

Detail screen display
S06
S07
S08
S09
S1xx (xx = zone number)
S2xx (xx = zone number)
S3xx (xx = bus unit number)
S6xx (xx = bus unit number)

Touchtone phone

Your system may be equipped with an option that allows system operation from a
touchtone phone, on or off the premises. This option enables programmed text to
be spoken through the phone and/or broadcast through interior speakers. Except
for custom word, the voice speaks the text that appears on alphanumeric
touchpads in the system.
Phone command prefix
What distinguishes a call to the panel from any other outgoing or incoming call is
the use of the phone command prefix:
• In the case of onsite operation, if the phone command prefix is dialed first
(within 5 seconds of picking up the phone), the panel waits for a valid access
code or command.
• If the system is being accessed remotely, the phone commands prefix is used
in conjunction with the access code.
The prefix is usually #, but can be changed to * by the installer. If your prefix has
been changed, use * as the first key you press instead of #.
Accessing the system from offsite
To access the system from offsite, the system needs to recognize two things
about the call:
• The panel needs to recognize that it should answer the phone.
• The panel needs to recognize that the code entered has the authority to
operate the system from offsite.
When using a cellular phone to operate the system, follow the offsite operating
instructions.
52
Source
Auto stay arming
Automation module
Keyswitch arming zone
System
Keychain touchpad
Wireless touchpad
Alphanumeric touchpad
Fixed display touchpad
Concord 4 User Manual