Interlogix DC108 Series Installation Sheet
Interlogix DC108 Series Installation Sheet

Interlogix DC108 Series Installation Sheet

Magnetic contact
Table of Contents

Advertisement

Available languages

Available languages

Quick Links

DC108 Series Magnetic Contact Installation
Sheet
EN SV
1
2
in.
50.8 m
3.5 in.
88.9 mm
2.25
in.
57.1 mm
EN: Installation Sheet

Description

The DC108 series are surface mounted magnetic contacts that
can be connected to a burglar alarm system. The DC108
series can be used on ferromagnetic and non-ferromagnetic
environments and doors. For differences in the DC108 series
see "Specifications" below.

Mounting

No special mounting tools are required.
The magnetic contact and the magnet are to be mounted
parallel to each other and with the text facing the same
direction using screws.
During installation the switching distances have to be
individually determined for each contact.
When the installation is completed, the electrical switch
function of the magnetic contact must be checked (for
example, with a continuity checker or multimeter). Use of
mechanical force, for example when installing, can damage the
glass body of the reed switches.

Notes

The X direction bias is not certified for use on any type of
material. See Figure 3.
When installing the contact please keep in mind that the
doors can bend under temperature influence.
UTC recommends to check regularly that the magnetic contact
is working properly on the control panel and that the installers
advise their customers to do this.
© 2018 UTC Fire & Security Americas Corporation, Inc.
2
1.5
in.
38.1 mm
1.5
in.
38.1 mm
4K7
0.43
in.
11 mm
1 / 4
(1)
(3)
4K7

Wiring description

See Figure 2.
#
Colour
Description
(1) 2X Silver, labeled as
Tamper, supervision line
supervised loop
(2) 2X Silver
Alarm, normally closed (DC108)
(3) 2X Silver
Alarm, normally closed (DC108R4.7)

Package content

1X Magnetic contact
1X Magnet
4X Screws
2X Plugs

Specifications

Cable length
Switch close resistance:
DC108
DC108R4.7
Switch open resistance:
DC108
DC108R4.7

Mounted on non-ferromagnetic material

Approach distance Y (switch close)
Removal distance Y (switch open)
Approach distance Z (switch close)
Removal distance Z (switch open)
P/N 1069821 (ML) • REV E • ISS 23OCT18
3
Y
(2)
2.5 m
<2 Ω
4.7 kΩ ±10%
>10 MΩ
9.4 kΩ ±10%
74 mm ±30%
81 mm ±25%
95 mm ±30%
100 mm ±30%
Z
X

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DC108 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Interlogix DC108 Series

  • Page 1 Wiring description See Figure 2. Description Colour Description The DC108 series are surface mounted magnetic contacts that can be connected to a burglar alarm system. The DC108 (1) 2X Silver, labeled as Tamper, supervision line supervised loop series can be used on ferromagnetic and non-ferromagnetic environments and doors.
  • Page 2 Motstånd öppen kontakt: >10 MΩ DC108 9,4 kΩ ±10% DC108R4.7 Contact information Monterad på icke-ferromagnetiskt material www.utcfireandsecurity.com or www.interlogix.com Dragavstånd vid stängning Y 74 mm ±30% For customer support, see www.utcfssecurityproducts.eu Dragavstånd vid öppning Y 81 mm ±25% Dragavstånd vid stängning Z 95 mm ±30%...
  • Page 3 återförsäljare vid köp av liknande ny utrustning eller lämnas till en därför avsedd deponering. För mer information, se: www.utcfssecurityproducts.eu/recycle/ Kontaktuppgifter www.utcfireandsecurity.com eller www.interlogix.com P/N 1069821 (ML) • REV E • ISS 23OCT18 3 / 4...
  • Page 4 P/N 1069821 (ML) • REV E • ISS 23OCT18 4 / 4...

This manual is also suitable for:

Dc108r4.7

Table of Contents