Macro Keys - Interlogix Concord 4 User Manual

• The partition touchpad you are using must arm/disarm that partition. You can
also arm/disarm additional partitions.
Keychain touchpad arming/disarming
To arm multiple partitions at the same time from a keychain touchpad, press the
Lock button. To disarm multiple partitions at the same time from a keychain
touchpad, press the Unlock button.
Use the following guidelines to arm/disarm multiple partitions from keychain
touchpads:
• A partition cannot be armed or disarmed if it is being controlled by another
source at the same time. For example, if you press the Lock button
attempting to arm Partition 1 and 2, a Partition 2 touchpad in use at the same
time prevents arming.
• When arming multiple partitions, any conditions that prevent arming (open,
trouble, active alarm, etc.) are identified on system touchpad displays in the
affected partition, while other touchpad displays show PROTEST. The normal
protest/auto force arm sequence follows, or you can press * on a system
touchpad to cancel the arming request. Pressing the Lock button again during
the protest condition bypasses any open sensors in the associated partitions
and arms those partitions.
• When disarming multiple partitions and alarms are active in one or more of
the associate partitions:
• Protest beeps sound for 5 minutes in all partitions being disarmed.
• Partitions in alarm where sirens have timed out sound protest beeps for 5
minutes.
• Partitions in alarm with active sirens continue sounding the alarm.
Anytime fire alarms are active, premises may not be safe to enter.
WARNING:
Proceed as follows: 1. Leave and call for help from a safe location and wait for
authorities to arrive. 2. When it is determined safe to enter the premises, go to a
system touchpad and check the system status to determine the alarm source.
Disarm and alarm memory is displayed for all associated partitions. 3. Press the
Unlock button a second time (within the 5 minute protest period) to disarm all
associated partitions and cancel all alarms, then go to a system touchpad and
check alarm memory to determine the alarm source.

Macro keys

Your system may include touchpads with macro keys that allow one-touch
operation. These are four keys located at the bottom of the touchpad. From the
factory, these keys are labeled and work as follows:
46 Concord 4 User Manual