Installation Instructions - RED COMPACT 18 Installation And User Manual

Pellet boiler hydro model
Hide thumbs Also See for COMPACT 18:
Table of Contents

Advertisement

1-WARNINGS AND WARRANTY TERMS

INSTALLATION INSTRUCTIONS

The product is a boiler designed for operation with wood pellets.
It must be installed in compliance with the regulations listed below:
Legislative Decree no. 93 of 25 February 2000
Implementation of Directive 97/23/EC (PED) in the field of pressure equipment.
FIELD OF APPLICATION: appliances powered by liquid (fuel-oil, diesel, oil) and solid fuels.
LAW No. 46 of 5 March 1990 and its implementing regulation Presidential Decree No. 447 of 6 December 1991 (and subsequent
amendments) and Ministerial Decree No. 37 of 22 January 2008
Standards for the safety of installations
FIELD OF APPLICATION: with unlimited heat potential.
Standard UNI 10847 of 03/2000
Single flue systems for generators powered with solid and liquid fuels. Maintenance and inspection. Guidelines and procedures.
FIELD OF APPLICATION: systems powered with solid and liquid fuels.
LAW No. 10 of 9 January 1991 and its implementing regulation Presidential Decree No. 412 of 26 August 1993 (and subsequent
amendments), Presidential Decree No. 551 of 21 December 1999.
Regulation amending Presidential Decree 412 relating to the design, installation, operation and maintenance of thermal systems of
buildings, in order to control energy consumption.
FIELD OF APPLICATION: with unlimited heat potential.
LAW No. 186 of 01.03.1968
Installation standard CEI 64-8 / II ed.
Electrical installations with rated voltage not exceeding 1000 V alternating current and 1500 V direct current.
Installation standard CEI 64-8 / I ed.
Electrical installations in buildings for residential use and the like.
Standard UNI 10683 of 09/2005
Systems fuelled with wood or other solid biofuels.
Installation requirements
FIELD OF APPLICATION: systems fuelled with wood or other solid biofuels with firebox thermo-chemical power below 35 kW.
The installation procedure requires the heating system diagram, prepared in compliance with the standard and local
recommendations in force as follows:
For the heating system - EN 303-5/2000 - "Heating boilers. Part 5: Heating boilers for solid fuels, hand and automatically stoked, with 
a nominal heat output of up to 300 kW. Terminology, requirements, testing and marking".
Local requirements for the connection to the chimney.
Local requirements for fire regulations.
For the power circuit - EN 60335-1/2008- "Safety of household and similar electrical appliances, Part 1 - General Requirements".
This appliance must be installed in compliance with the standards in force when installing the boiler.
Technical Dept. - All rights reserved - Reproduction is prohibited
5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Compact 24

Table of Contents