Opening/Closing The Internal Door; Settings To Be Carried Out Before The Initial Start-Up - RED COMPACT 18 Installation And User Manual

Pellet boiler hydro model
Hide thumbs Also See for COMPACT 18:
Table of Contents

Advertisement

7-INITIAL START-UP
Do not stand close to the product and air the room. The smoke and smell of paint will disappear after about an hour of operation, however,
remember they are not harmful in any case.
The boiler will be subject to expansion and contraction during the start-up and cooling phases, therefore light creaking noises may be
heard.
This is absolutely normal as the structure is made of laminated steel and must not be considered a defect.
It is extremely important to make sure the boiler is not immediately overheated and the temperature is increased gradually, initially using
low power.
This will prevent damaging the ceramic or serpentine tiles, the welds and the steel structure.
DO NOT EXPECT HEATING EFFICIENCY IMMEDIATELY!!!

OPENING/CLOSING THE INTERNAL DOOR

ATTENTION!
The door must be closed properly for the boiler to work correctly.
to open the internal door lift and pull the handle towards you. In the event one needs to open the door while the boiler is running one
must use suitable heat protection clothing (for example leather gloves).

SETTINGS TO BE CARRIED OUT BEFORE THE INITIAL START-UP

Once the power cable is connected in the rear part of the boiler, turn the switch, also placed at the rear, to position (I). To switch the boiler
on or off press key 1 on the control panel.
24
1
OPENING THE INTERNAL DOOR.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Compact 24

Table of Contents