Figure 13. Location Of Resistors For Rework (Before Rework); Figure 14. Location Of Resistors For Rework (After Rework) - Intel Core 2 Duo Processor User Manual

Development kit with ddr3 system memory

Hide thumbs Also See for Core 2 Duo Processor:

Table of Contents

Add-In Cards

Figure 13. Location of Resistors for Rework (before Rework)

2. On the mid/upper left hand section of Eaglemont card, resistor locations

R5B22, R5B19, R5B18, R5B16, R5B14, R5B11, R5B9, and R5B6 can be

identified. As mentioned in the procedure above these resistors needs to be

taken off and assemble them in the ref. des. R5B21, R5B20, R5B17, R5B15,

R5B13, R5B10, R5B8, and R5B7. Refer the pictures below for resistor location

before and after rework. As mentioned in the procedure above, the vertically

mounted resistors need to be removed and assembled horizontally on

designated pads.

Development Kit User's Manual

Table of Contents

Show Quick Links

Table of Contents

Do you have a question about the Core 2 Duo Processor and is the answer not in the manual?

Gm45 express chipset