Setting Operation Options - CYBEX 600T Owner's Manual

Cybex 600T Treadmill Owner's Manual
9. As you press the Incline or Speed
will show the actual incline or speed.
10. When the treadmill reaches the set incline and speed, the displays will stop
flashing and remain steadily illuminated to indicate that the desired settings
have been reached.
11. Run the treadmill through its full % grade range. Press the Incline
until the treadmill reaches its highest grade (15%). Then press the Incline
key until the treadmill is back to 0% grade.
12. Press Pause/Stop three times to stop the running belt, end the checkout
session, and return the display to Dormant Mode.

Setting Operation Options

1. Enter Test Mode by holding down any key while turning on (I) power.The
display will read " test".
NOTE: After changing any value, you must press Enter to save that value.
2. Press Time to set time options. Change values with
time type by pressing Time:
A. Maximum Time: choices are between 5 and 60 minutes; default is 60.
B. Default Time: choices are between 5 minutes and maximum time;
default is 60.
C. Idle Time: how long the treadmill retains your current workout data
during a pause in the workout or after a workout; choices are 30
seconds or 1 to 15 minutes, retaining the current workout data until a
new workout begins; default is 2 minutes.
D. Halt Time: how long the running belt will keep moving if the user steps
off the treadmill; choices are between 5 and 45 seconds; default is 30
seconds. You can also disable this feature by setting the time to None.
3. Press Weight to set units of measure and tone options with
change option type by pressing Weight:
A. Choose English or Metric units; English is the default.
B. Keypress tone on or off; on is default.
C. Scan: default is off. If set to on, the data readouts will scan unless a
specific data key is pressed.
or keys, the respective displays
and
Front Pages
About This Manual . . . . . . . . . . i
FCC Compliance Information . i
Declaration of Conformity . . . . ii
Table of Contents . . . . . . . . . . iii
1
Safety
Important Voltage Information 1-1
Grounding Instructions . . . . 1-1
key
Important Safety Instructions 1-2
Warning Labels . . . . . . . . . . 1-4
Caution Labels. . . . . . . . . . . 1-5
2
Technical Specifications
Specifications . . . . . . . . . . . 2-1
Stableflex System . . . . . . . . 2-2
3
Operation
Quick Start. . . . . . . . . . . . . . 3-1
Stopping the Treadmill. . . . . 3-1
Automatic Stop Feature . . . 3-1
Selecting Programs &
Options . . . . . . . . . . . . . . . . 3-2
Displaying Heart Rate . . . . . 3-2
The Workout Graph . . . . . . . 3-2
Detailed Operation Guide . . 3-3
Control During Operation . . 3-4
Changing Data Readouts . . 3-5
Use of Programs . . . . . . . . . 3-6
4
Preventive Maintenance
keys; change
Regular Maintenance
Activities . . . . . . . . . . . . . . . . 4-1
Running Belt Maintenance . 4-3
5
Setup & Assembly
Quick Setup . . . . . . . . . . . . 5-1
Choosing & Preparing a Site 5-1
Electrical Power
Requirements . . . . . . . . . . . . 5-3
Unpacking . . . . . . . . . . . . . . 5-3
Assembling the Treadmill. . . 5-4
Test the 600T Operation . . . 5-8
Setting Operation Options. . 5-9
6
Customer Service
Contacting Service . . . . . . . 6-1
Serial Number & Voltage . . . 6-1
Warranty . . . . . . . . . . . . . . . 6-1
Return Material Authorization
(RMA). . . . . . . . . . . . . . . . . . 6-4
Damaged Treadmill or Parts 6-4
and keys;
Ordering Parts . . . . . . . . . . . 6-5
Page 5-9