CYBEX 600T Owner's Manual page 38

D. Line Frequency: frequency of the power line that supplies power to your treadmill.
The default setting is 50 Hz for metric consoles and 60 Hz for English consoles.
NOTE: If you have an English console and a 50 Hz power line frequency, then you
must change the default setting from 60 Hz to 50 Hz for the proper elevation
frequency.
Remember: You must press Enter after changing a value for that value to be stored.
4. To exit Test Mode press the Pause/Stop key twice.
Your treadmill is now ready for use. Turn to the Operation chapter to learn how to operate the
treadmill. You should begin with walking speeds first, to be sure everything is functioning
properly.
Page 5-10
Cybex 600T Treadmill Owner's Manual