Function Mode; Dmx Address Setting; Auto Program; Music Control - Elation DESIGN SPOT 575E User Manual

Function Mode

DMX address setting

With this function, you can adjust the desired DMX-address via the Control Board.
• Select "Set DMX address" via the encoder.
• Press the encoder, adjust the DMX address by turning the encoder.
• Press the encoder to confirm.
• Press the Mode/Esc-button in order return to the main menu.
Display the DMX 512 value of each channel
With this function you can display the DMX 512 value of each channel. The display automatically shows the channel
with a value changing.
Slave setting
With this function, you can define the device as slave.

Auto Program

With this function, you can run the internal program. You can select the desired program under "Select program". You
can set the number of steps under "Edit program". You can edit the individual scenes under "Edit scenes". With this
function, you can run the individual scenes either automatically, i.e. with the adjusted Step-Time.

Music control

With this function, you can run the internal program sound-controlled.
Information
Time information
Current time
With this function, you can display the temporary running time of the device from the last power on. The display shows
"XXXX", "XXXX" stands for the number of hours. The counter is reseted after turning the device off.
Machine on time
With this function, you can display the running time of the device. The display shows "XXXX", "XXXX " stands for the
number of hours.
Lamp on time
With this function, you can display the running time of the lamp. The display shows "XXXX", "XXXX" stands for the
number of hours.
Lamp off time
With this function, you can display the temporary running time of the lamp from the last lamp on. The display
Shows "XXXX", "XXXX " stands for the number of hours. The counter is reseted after turning the lamp off.
Clear lamp time
With this function you can clear the running time of the lamp. Please clear the lamp time every time you
replace the lamp.
• Select "Clear lamp time" by turning the encoder.
• Press the encoder, the display shows "ON" or "OFF".
• Press the encoder to confirm.
• Press the Mode/Esc-button in order to return to the main menu.
Temp. Info.
Base Temp
With this function you can display the temperature in the projector base (near LCD-display) in Celsius.
Inside head Temp
With this function you can display the temperature on the display board of the base (near CMY-filter) in Celsius.
- 11 - V1.0 01NR