Menu Functions; Function Mode - Elation Design Wash 575E User Instructions

Select
Programs
Edit Program
Edit Scenes
Rec. Controller

8. 1 Function Mode:

1. DMX address setting
After applying power and the rest process the Design Spot 575™ LCD will display the
fixture's current DMX. If the fixture is not receiving a DMX signal the display will flash
continuously. To set or adjust a DMX address, please follow the procedure below:
1. Toggle through the menu by pressing the Up and Down buttons until the display
shows "Set DMX Address." Tap the enter button to make changes to the address,.
2. While the current three-digit address is flashing, use the Up and Down buttons to
select adjust the address. Lock your new address into the unit's memory by
pressing the Enter button.
The DMX address is non-destructible and will remain in the fixture's memory even
when power to the fixture has been switched off. Memory is backed-up and retained by
an internal power source with a five year shelf life.
2. Display the DMX 512 value of each channel
With this function you can display the DMX 512 value of each channel. The display will
automatically readout the changing DMX values as they are received.
3. Slave setting
With this function, you can define the device as slave for operation in Master/Slave
mode.
©Elation Professional®
Auto Pro Part 1 Program 1 ~ 10 Program 1
Auto Pro Part 2 Program 1 ~ 10 Program 2
Auto Pro Part 3 Program 1 ~ 10 Program 3
Program 1 Program Test
: Step 01=SCxxx
Program 10 Step 64=SCxxx
Edit Scene 001 Pan,Tilt,......
~ Edit Scene --Secne Time--
250 Input By Outside
XX~XX
("STEP XX")
Pan=xxx......
TIME=xx.xs
21
Design Wash 575E™
Select programs to be run
Testing program
Program in loop
Save and exit
Save and automatically
return
manual scenes edit
Automat. scenes rec
Design Wash 575E™