Mounting The Device - Elation DESIGN SPOT 575E User Manual

CA UTION
Do not operate this device with open cover
b) Mounting the device
CA UTION
Please consider the EN 60598-2-17 and the other respective national norms during the
installation. The installation must only be carried out by a qualified person.
The installation of the effect has to be built and constructed in a way that it can hold 10 times the
weight for 1 hour without any harming deformation.
The installation must always be secured with a secondary safety attachment, e.g. an appropriate safety
cable.
Never stand directly below the device when mounting, removing or servicing the fixture.
The operator has to make sure the safety relating and machine technical installations are approved by
an expert before taking the device into operation for the first time.
These installations have to be approved by a skilled person once a year.
CA UTION
Before taking into operation for the fi rst time,
the installation has to be approved by an expert.
Cautions:
The effect should be installed outside areas where persons may reach it, walk by or be seated.
CA UTION
When installing the device, make sure there is no highl y
inflammable material within a distance of min. 0,5m
Overhead mounting requires extensive experience, including amongst others calculating working load
limits, installation material being used, and periodic safety inspection of all installation material and
the device. If you lack these qualifications, do not attempt the installation yourself. Improper
- 6 - V1.0 01NR