Name List (Directory); Programming Call Forwarding - ASCOM Eurit 30 Operating Manual

Programming your telephone

Name list (directory)

Use the keypad to store a name as follows. To repeat a letter use the cursor key. Example:
Name List
new
Name: HUSTON
ok space
No: 06109738400
ok
The name or number can be corrected/changed by pressing the Foxkey under
"change".

Programming call forwarding

You may have to request this service separately depending on your ISDN connection. Call
forwarding allows you to reroute all calls to any other telephone number. Call forwarding is only
possible if a Multiple Subscriber Number (MSN) has been programmed.
Telephone settings
Call Forward A: off
change
Press the MENU key repeatedly until the menu "Name
List" is displayed.
Press the Foxkey under "new".
Enter, for example, the name HUSTON.
For "H" press key
times, etc. If necessary press the Foxkey under "space" or
use the
Press the Foxkey under "ok" to change to the display for
programming the number.
del
Enter the telephone number for the name (including
the dialling prefix).
Press the Foxkey under "ok" to store the name and
number.
del
Press the MENU key repeatedly until the message
"Telephone settings" is displayed. Press the Foxkey
repeatedly under
"Call Forward B" or "Call Forward C" is displayed.
Press the Foxkey under "change".
17
twice, for "U" press key
key to move the cursor.
until the message "Call Forward A",
three