Calling Line Identification Restriction (Clir); Reject Incoming Calls; Malicious Call Identification (Mcid) - ASCOM Eurit 30 Operating Manual

Using the extended-feature functions

Calling Line Identification Restriction (CLIR)

This service must be requested from your telecoms provider.
If you are a subscriber to this service, you can suppress the display of your number on the called
party's telephone.
Own No. suppressed
Your number (calling line ID) is suppressed only for the next call made. Once the
handset is replaced, CLIR is switched off again.
Press the MIC key twice to deactivate CLIR.
Case-related calling line identification is not supported.

Reject incoming calls

The number is stored in the unanswered calls memory.

Malicious Call Identification (MCID)

This service must be requested from your telecoms provider.
It allows you to have a malicious call registered while in progress. The exchange registers the
numbers of the called and calling lines, together with the date and time of the call.
If you wish to register a malicious call (only possible while the call is active), press the auto-dial
key which has been pre-programmed for this purpose (see the section on "Programming auto-
dial keys").
With the handset on-hook, press the MIC key.
An acknowledgement message is briefly displayed. You
can now dial as normal.
If you do not wish to answer an incoming call, you can
reject it by pressing the ESC key.
14