Suppress Call Waiting; Switch On Direct Name Dialling; Programming The Charging Unit - ASCOM Eurit 30 Operating Manual

Programming your telephone

Suppress call waiting

You can suppress the call waiting function if you do not want to be disturbed by a second
incoming call.
Installation
Call-Waiting: on
change
Call-Waiting: on
ok
off

Switch on direct name dialling

You can use this function for frequently-dialled numbers stored in your name list. Just press the
associated letter on the alphanumeric keypad to display the name (see the section under "Making
a call").
Installation
Direct namedial: off
change
Direct namedial: off
ok on
On-hook dialling is no longer possible.

Programming the charging unit

To obtain an accurate call charge display you must enter the charging unit (factor). You can
obtain the valid charging unit from your telecoms operator.
Installation
Charging unit:
change
Charging unit: 23 Pf.
ok
Press the MENU key as often as required until
"Installation" is displayed. Press the Foxkey under
repeatedly until "Call-Waiting" is displayed.
Press the Foxkey under "change".
Press the Foxkey under "off" and "ok" to suppress the
call waiting function.
Press the MENU key repeatedly until "Installation" is
displayed. Press the Foxkey repeatedly under
"Direct namedial" is displayed.
Press the Foxkey under "change".
Press the Foxkey under "on" and "ok" to activate direct
name dialling.
Press the MENU key as often as required until
"Installation" is displayed. Press the Foxkey under
repeatedly until "Charging unit" is displayed.
23 Pf.
Press the Foxkey under "change".
Enter the desired charging unit.
Press the Foxkey under "ok" to store the new value.
23
until