Using the extended-feature functions
Terminating a three-way conference call
To speak to both call partners separately again, press the preprogrammed auto-dial key again.
If the telephone is connected to a PBX, please refer to the relevant section in your PBX
operating manual.
Automatic call-back if busy
Contact your telecoms operator for information on the introduction date for this service.
If the person you have called is busy, you can activate an automatic ringback call.
Called User Busy
Call-Back:
06.06.95
If you no longer need to answer the call-back, leave the handset on-hook or press the
ESC key.
A call-back remains activate for approximately 40 minutes, after which it is
automatically cancelled by the exchange.
You can deactivate a call-back by pressing the Foxkey under
"del".
If the telephone is connected to a PBX, please refer to the relevant section in your PBX
operating manual.
Called party is busy. "Call-Back" is displayed.
Press the Foxkey under "Call-Back" to activate automatic
call-back.
Replace the handset. The
09:42
As soon as the person you were calling has hung up, a
signal indicates that the line is free. The number is
automatically redialled if you lift the handset within 15
seconds of hearing the signal.
11
symbol is displayed.
then pressing under
Need help?
Do you have a question about the Eurit 30 and is the answer not in the manual?