Accessing The Web Server - Topfield SRP-2411 User Manual

90 Accessing to The Digital Receiver via The Internet

9.3 Accessing the web server

You may get the digital receiver to be assigned a dynamic IP
address. If so, set the Connection Type option to DHCP.
You can view the dynamic IP address assigned to the digital
receiver by your router at the IP Setting menu.
Sometimes when the digital receiver is restarted, the dynamic
IP address will be changed and you will have to check it at the
IP Setting menu to access the digital receiver. To avoid this
cumbersome thing, you had better assign a static IP address
rather than dynamic one.
To assign a static IP address, set the Connection Type option to
Static, then the IP Address, Subnet Mask, Gateway, Primary
DNS and Secondary DNS options become enabled. You have
to set these options to match with the configuration of your
router.
To Access to the web server, set the Installation
Setting Web Server option to Enable.
Select the Installation
this time, you have to enter Personal Identification Number
(PIN). Then, set the User ID and Password options as you
desire. And select OK to save the settings. When you access
to the web server, you will be asked for the account that was
made with these options.
In way of the web server of the digital receiver, you can do the
following:
• Download recording files.
• Create new recording timers.
• View information about the programme currently being
recorded.
• View the system information of the digital receiver.
To access the digital receiver's home page through your web
browser, enter its IP address, or domain name if you use a
Network Setting
Network
User Info menu. At