Table of Contents
Advertisement
100 Universal Remote Control
If you cannot find a code for your device, do as follows:
1. Turn on the device you want to operate.
2. Point the remote contorl at the remote senser on the de-
vice.
3. Hold down the
for two seconds until LED lamp flashes on. For example,
if you want to operate your television with the remote
control, press the
4. Press the
device turns off.
If you want to find out the number which you set for your
device, do as follows:
1. Hold down the
for two seconds. For example, if you want to know the
number which you set for your television, press the
and
buttons simultaneously.
TV
2. Press the
number with blinks. For example, if the number is 3,
LED lamp will blink three times. In case of 0, LED lamp
will blink ten times.
You can reset the settings. To do that, do as follows:
1. Hold down the
more than five seconds.
2. Each device button blinks three times in the following
order:
PVR
3. After that, all settings will be reset to the manufacturer's
factory settings.
and device button simultaneously
OK
and
OK
TV
or
CHANNEL
CHANNEL
and device button simultaneously
OK
button. Then LED lamp will show the
and
buttons simultaneously for
TV
0
DVD
AUX
buttons simultaneously.
button until the
TV
OK
Advertisement
Table of Contents
