The Front Panel - Topfield SRP-2411 User Manual

NOTE
When the digital receiver is off but plugged into a wall outlet,
we say that it is in standby mode; on the other hand, when it
is on, it is in operation mode. Even when you are not using
the digital receiver, you should keep it plugged into a wall
outlet to be in standby mode so that it can run timer events
at any time.

1.2.1 The front panel

The front panel of the digital receiver has buttons to control
the digital receiver, specific lamps and a display to indicate its
status. The following indicates what they mean.
STANDBY CH
Front display shows the current time in standby mode, and
CH
VOL
VOL
displays the current service in operation mode.
button switches the digital receiver between standby
mode and operation mode.
, buttons switch to the previous or next service.
, buttons decrease or increase the volume.
1.2 Controlling the digital receiver 3
1