Configuring Lnb Settings - Topfield SRP-2411 User Manual

High definition digital satellite receiver personal video recorder common interface
Table of Contents

Advertisement

20 Service Search
3.1.1 Configuring LNB settings
There are two large frequency bands for satellite broadcasts.
One is
band which ranges approximately from 4 to 6 GHz.
The other is
band which ranges approximately from 12 to
18 GHz.
Pressing the
OK
the satellite list in alphabetic order. Select the satellite toward
which your antenna is set to face. Even if you cannot find
your desired satellite, you can add your desired satellite to the
satellite list. See
§3.3
You have to specify which tuner is connected to your selected
The LNB (Low Noise Block converter)
is used to take a wide band of relatively
high frequencies, amplify and convert
them to similar signals that is carried at
a much lower frequency, which is called
Intermediate Frequency (IF). High fre-
quencies from satellites are converted
into 950 to 2150 MHz by a LNB.
Select the Installation
ting menu to configure the LNB
settings. You should see a screen
like the left figure.
button on the Satellite Name option displays
for a detailed description.
LNB Set-

Advertisement

Table of Contents
loading

Table of Contents