Audio Mode - Topfield SRP-2411 User Manual

depending on the setting of the VCR SCART Type option. If
the option is set to Standard, the digital receiver will pass the
video from the video device to your television when it starts
playback. But if the option is set to External A/V, the digital
receiver will not pass the video automatically. To pass it, you
have to press the
It is impossible for the digital receiver to record the video from
the video device since the digital receiver is just a bypass for
the video recorder.

4.2.5 Audio mode

Basically, there are two audio sources as you can find two audio
sockets on the back panel of the digital receiver. You can enjoy
only one source or both of them in either stereo or mono. Set
the Sound Mode option as you desire.
Apart from this setting, you can change the sound mode with
the
The digital receiver can output two types of digital audio sig-
nals via the S/PDIF connector. One is an encoded signal, and
the other is a decoded signal. If you have the digital receiver
linked to your audio-video receiver via the S/PDIF connector,
you have to set the Dolby Digital option to Off, which means
that the digital receiver will output encoded Dolby Digital au-
dio without decoding so that your audio-video receiver can
decode it. Otherwise, set it to On, then the digital receiver will
output decoded Dolby Digital audio, scaling down it to two
channels.
NOTE
Only if the service you are currently watching provides
a Dolby digital audio track, you can enjoy Dolby digital
sound.
button.
M
button. See §5.2.4 for a detailed description.
4.2 Video and audio settings 37
4