Topfield SRP-2411 User Manual page 23

To use the SCART connector
If you have such a television, use an appropriate conversion ca-
ble to link the TV socket on the digital receiver to the matching
socket on your television.
If you connect with a standard SCART cable, you do not have
to make audio connection because the SCART connector can
output stereo audio. But if you use a conversion cable, such
as SCART-to-Component, you have to make audio connec-
tion.
NOTE
You cannot view high definition video with a SCART con-
nector.
To use the Component video connector
Y
P b
P r
2.4 Connecting up your digital receiver 15
For best results with a standard television set,
you should use a SCART cable. Plug one end
of the cable into the TV socket on the digital
receiver, and plug the other end into a free
SCART socket on your television.
Some televisions have inputs via S-Video or
Component connectors rather than SCART.
You need to obtain a Component video cable
(RCA cable) to use the Component video con-
nector. Plug one ends of the cable into the Y
(green), Pb (blue) and Pr (red) sockets on the
digital receiver, and plug the other ends into
the matching sockets on your television.
2