Table of Contents
Advertisement
3.3 Editing the transponder list
1. Choose your desired satellite at the Satellite Name op-
tion.
2. Choose your desired transponder at the Frequency op-
tion or enter it with the numeric buttons.
3. Change the Polarization option to the polarization of your
desired transponder.
4. Change the Modulation option to the modulation type of
your desired transponder. If your desired transponder
has high definition broadcasts, you should set this option
to DVB-S2 QPSK or DVB-S2 8PSK; then the FEC option
and the Pilot option become enabled. You should also set
these options correctly.
5. To change a satellite entry's name, select your desired
entry at the Satellite Name option and select the SAT
Name Edit option. Then the on-screen keyboard appears.
Change the name and save it. See
on-screen keyboard.
6. Select the Save option and press the
the changes. To stop at any time or to exit without saving,
press the
button.
EXIT
3.3 Editing the transponder list 29
You can change attributes of a
transponder. Select the Installa-
tion
SAT/TP Edit menu. You
should see a screen like the left
figure. To change the informa-
tion of a satellite entry, perform
the following steps:
§6.3
for how to use the
button to save
OK
3
Advertisement
Table of Contents
