68 Accessing via Network
NOTE
After selecting activate please allow up to 5 seconds for fields
to populate. Most routers can be accessed via a web browser.
Refer to your Router user guide on how to access router set-
ting.
9.3 Accessing the web server
To Access to the web server, set the Installation > Network Set-
ting > Web Server option to Enable.
Select the Installation > Network Setting > User Info menu.
At this time, you have to enter Personal Identification Num-
ber (PIN). Then set the User ID and Password options as you
desire. And select OK to save the settings. When you access
to the web server, you will be asked for the account that was
made with these options.
In way of the web server of the digital receiver, you can do the
following:
• Download recording files.
• Create new recording timers.
• View information about the programme currently being
• View the system information of the digital receiver.
To access the digital receiver's home page through your web
browser, enter its IP address, or domain name if you use a
DDNS service. For the DDNS service, refer to the user man-
ual of your router.
recorded.