Connecting To Your Television Set - Topfield SRP-2411 User Manual

14 Setup

2.4.2 Connecting to your television set

To use the HDMI connector
antenna only sends the frequencies that it can catch with the
LNB frequency and polarisation specified by the digital re-
ceiver. So if you have linked from the LNB 1 OUT connector
to the LNB 2 IN connector, you would have some limitations
in using some features such as dual recording. Likewise, if
you have another digital receiver linked from the LNB 2 OUT
connector, you can only use it limitedly. See
details.
For all the following connections of the digital receiver, we
recommend you to use the first connector to get the best picture
quality. If your television does not have a matching connector,
then use the next connector in the following order for a better
picture quality.
1. HDMI connector (HDMI)
2. Component connector (YPbPr)
3. SCART connector (TV)
4. Composite connector (VIDEO)
You should configure audio and video settings after connecting
up the digital receiver. See
you should use a HDMI cable for best results.
§4.2 for a detailed description.
If you have a high definition television set,
Plug one end of the cable into the HDMI socket
on the digital receiver, and plug the other end
into the matching socket on your television.
In this case, you do not have to make audio
connection because the HDMI connector can
output stereo audio or Dolby digital audio.
§3.1 for more