Configuring Usals Settings - Topfield SRP-2411 User Manual

24 Service Search
3.1.3 Configuring USALS settings
There are more motor control options for installers, but this
guide does not describe them. If you are an installer, refer them
to the manual about the STAB rotor.
USALS (Universal Satellite Automatic Location System), also
known as DiSEqC 1.3, calculates the positions of all available
satellites from your location. Compared to DiSEqC 1.2, it is no
longer required to manually search and store every satellite
position. Just pointing to a known satellite position is enough.
This position will act as a central point. The USALS will then
calculate positions of visible satellites.
To get every satellite position calculated, perform the following
steps:
1. Choose your desired satellite at the Satellite Name op-
tion.
2. Select the tuner that is connected to the motorized an-
tenna at the Tuner Select option.
3. Enter your location to the My Longitude option and the
My Latitude option with the
4. Enter the position of your selected satellite to the Satellite
Angle option if it is not correct.
To use the USALS protocol, select
the Installation
menu. You should see a screen
like the left figure. At first you
have to set the Motorized DiSEqC
1.3 option to Enable.
, and numeric buttons.
USALS Setting