Accessing The Web Server - Topfield TF7750HDPVR User Manual

Sometimes when the digital receiver is restarted, the dynamic
IP address will be changed and you will have to check it at the
LAN Status menu to access the digital receiver. To avoid this
cumbersome thing, you had better assign a static IP address
rather than dynamic one.
Set the DHCP option to Off, then the IP Address, Subnet Mask
and Gateway options become enabled. You have to set these
options to match with the configuration of your router.

8.3 Accessing the web server

You can log into the web server with the user name and pass-
word specified in the LAN Setting menu if they have been set.
As to how to configure the LAN settings, refer to §8.2.
In way of the web server of the digital receiver, you can do the
following:
NOTE
It is recommended to use the Internet Explorer web browser
in order to fully enjoy the above facilities. If you use a differ-
ent web browser such as Netscape Navigator, some problems
may occur.
To access the digital receiver's home page through your web
browser, enter its IP address, or domain name if you use a
DDNS service. For the DDNS service, refer to the user man-
ual of your router.
• Download recording files.
• Create new recording timers.
• View information about the programme currently being
recorded.
• View the system information of the digital receiver.
8.3 Accessing the web server 77
8