Connecting To Your Video Recorder; Switching On For The First Time - Topfield SRP-2411 User Manual

2.4.3 Connecting to your video recorder

The digital receiver can also output video to another device
such as a video recorder through an auxiliary SCART connec-
tor.
2.5 Switching on for the first time
Now that you have your digital receiver connected, you should
plug it into a mains socket. Ensure that your television set is
turned on and on the correct video channel so that you will be
able to see the display from the digital receiver.
Before switching on the digital receiver, you should insert bat-
teries into the remote control. Open the battery compartment
by removing the lid, and then insert the batteries observing the
polarity, which is marked on the base of the battery compart-
ment.
Press the
In a little time, you may see a picture displaying a menu.
2.5 Switching on for the first time 17
To enjoy Dolby digital audio, your television
or audio-video receiver must be able to de-
code Dolby digital audio, and you need to
obtain an S/PDIF cable. If you want to use
the COAXIAL connector, prepare a coaxial
S/PDIF cable (RCA cable); otherwise, to use
the OPTICAL connector, prepare an optical
S/PDIF cable.
You need to obtain a SCART cable to use the
auxiliary SCART connector. Plug one end
of the cable into the VCR socket on the digi-
tal receiver, and plug the other end into the
matching socket on your video recorder or
suchlike.
button on the top left corner on the remote control.
2