3.
Screw the lock to the chassis using the screw provided.
Figure 8-43
4.
Insert the plug end of the security cable into the lock (1) and push the button in (2) to engage the
lock. Use the key provided to disengage the lock.
Figure 8-44
Front Bezel Security
The front bezel can be locked in place by installing a security screw provided by HP. To install the
security screw:
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Remove the front bezel
118 Chapter 8 Removal and Replacement Procedures Microtower (MT) Chassis
Attaching the Lock to the Chassis
Engaging the Lock
(Access Panel on page
(Front Bezel on page
(Preparation for Disassembly on page
75).
76).
74).