Access Panel - HP Compaq 6005 Pro Business PC Maintenance & Service Manual

Access Panel

1. Prepare the computer for disassembly
CAUTION:
and that the power cord is disconnected from the electrical outlet.
2. Loosen the two captive thumbscrews (1) that secure the access panel to the computer chassis.
3. Use the handle located between the thumbscrews to lift the access panel off the unit (2).
NOTE:
with the access panel is facing up.
Figure 8-2
To install the access panel, reverse the removal procedure.
Before removing the computer access panel, ensure that the computer is turned off
You may want to lay the computer on its side to install internal parts. Be sure the side
Removing the Computer Access Panel
(Preparation for Disassembly on page 74).
Access Panel 75