Power Supply - HP Compaq 6005 Pro Business PC Maintenance & Service Manual

Power Supply

1. Prepare the computer for disassembly
2. Remove the access panel
3. Disconnect all power cables from the drives and from the system board.
4. Remove the four silver T15 screws that connect the power supply to the chassis.
5. Press the tab on the base pan in front of the power supply that holds it in place.
6. Slide the power supply toward the front of the computer, rotate toward the fan so the power supply
clears the lip on the top of the chassis, and then lift the power supply out of the chassis.
To install the power supply, reverse the removal procedure.
(Preparation for Disassembly on page
(Access Panel on page 75).
74).
Power Supply 111