Removing An External 3.5-Inch Drive - HP Compaq 6005 Pro Business PC Maintenance & Service Manual

Business pc
Hide thumbs Also See for Compaq 6005 Pro Business PC:
Table of Contents

Advertisement

10.
Rotate the drive cage back down to its normal position.
CAUTION:
Figure 9-26
11.
Replace the access panel.
The system automatically recognizes the drive and reconfigures the computer.

Removing an External 3.5-inch Drive

CAUTION:
computer.
The 3.5-inch drive is located underneath the 5.25-inch drive. You must remove the external 5.25-inch
drive before removing the external 3.5-inch drive.
1.
Follow the procedure in
inch drive and access the 3.5-inch drive.
CAUTION:
the electrical outlet before proceeding.
Be careful not to pinch any cables or wires when rotating the drive cage down.
Rotating the Drive Cage Down
All removable media should be taken out of a drive before removing the drive from the
Removing an External 5.25-inch Drive on page 139
Ensure that the computer is turned off and that the power cord is disconnected from
to remove the 5.25-
Installing and Removing Drives 143

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents