Camp-On Message; Reverse Message - NEC 1232 AK Series Operation Manual

Alphanumeric Display TEL Features
To cancel message at message-
To call back or delete message
at message-received telephone:

Camp-On Message

When you make an Intercom call to display phone and receive a busy signal, call can not be connected. Then
you can send a text message. Intercom Off-hook Signaling must be enabled at the called extension.
To set Camp-On message:

Reverse Message

The extension received "Intercom Off-Hook Signaling" can send a text message to calling extension if this
extension user is inconvenient to reply to the signal. For example, you could select the message 49 "CALL
BACK LATER ".
To send Reverse Message:
44
1. Press
originated telephone:
2. Use
3. Press
1. Press
2. Use
3. Press
1. Place Intercom call. Hear busy tone.
2. Activate Intercom Off-hook Signaling (see Intercom Off-
3. Press
4. Dial message number (00-49) and
1. Press
2. Dial message number (1-3).
CHECK
and # .
- First message appears on the display.
to scroll forward and use
∗
scroll backward.
to cancel message.
HOLD
or
CLEAR
Press to return to idle condition.
CHECK ∗
and .
- First message appears on the display.
∗ to scroll forward and use
scroll backward.
ICM
to call back.
or
Press to delete message.
HOLD
or
CLEAR
Press to return to idle condition.
hook Signaling on page 29).
∗ .
or
One-Touch
Press key No.1 or No.2 for personal message, then
dial ∗ .
or
FLASH
Press , edit a message by Message Edit Mode, then
FLASH
press again and dial
- Confirmation tone is heard when message is sent.
- On conversation, "Intercom Off-Hook Signal" received.
TRFR
.
Dial 1: System common message No.47
Dial 2: System common message No.48
Dial 3: System common message No.49
The default value of 47, 48 and 49 are:
No.47: TAKE MESSAGE
No.48: PLEASE HOLD
No.49: CALL BACK LATER
#
to
# to
∗ .
∗ .