Key Touch Tone; Easy Trunk Access; Queuing Group Access - NEC 1232 AK Series Operation Manual

Key Touch Tone

The Key Touch Tone feature allows a tone to be emitted from the built-in speaker each time a Line, One-
Touch or dial pad key is pressed. The tone confirms the key was fully pressed.
To activate Key Touch Tone:
To cancel Key Touch Tone:

Easy Trunk Access

Easy Trunk Access lets you access an outgoing line without pressing a Line key or dialing a two-digit line
number. A single-digit code automatically accesses an outgoing outside line.
To access the first available

Queuing Group Access

Queuing Group Access lets you access the first available outgoing line in a Queuing Group without pressing
a Line key or dialing a two-digit line number. A single-digit code automatically accesses an outgoing outside
line from small number, large number, or rotated number.
To access the first available
line in a queuing group:
- Do not lift handset.
1. Dial
- Do not lift handset.
1. Dial
1. (On-Hook and Speaker off condition)
outgoing line:
2. Dial
- A line is seized and dial tone comes over the speaker.
1. Lift handset.
2. Dial 9 or 0.
1. Press
2. Press
3. Dial Queuing Group number (1-6).
- A line is seized and dial tone comes over the speaker.
1. Lift handset.
2. Dial 06 or 96 .
3 Dial Queuing Group number (1-6).
Trunk Outgoing Call
.
∗
. Final Key Touch Tone is heard.
∗
.
0
SPK
key.
ICM
key.
11