NEC 1232 AK Series Operation Manual page 69

Message
Message Type
No.
14 Ending Message for Leave
Telephone Number
15 Confirmation Message for
Leave Telephone Number
16 Demanding Message for
seize the 2'nd Line
17 Continue Message
18 Demanding Message for
Telephone Number (DISA)
19 Trunk line busy Condition
Message
20 Night Message
21
22
23
24 Unattendant Message
This message is sent when outside caller finishes for
leaving telephone number.
Example Message:
Telephone Number has been recorded.
This message is sent when telephone number is left at
each KTS with display..
Example Message:
You have left telephone number. Please confirm..
This message is sent to be seized the 2'nd line by outside
caller on the Trunk -to-Trunk .
Example Message:
Dial queuing group number or dial "9" then line
nd
number to seize 2 line.
This is operation message to inform outside caller of how
to continue or finish the conversation on the Trunk-to-
Trunk.
Example Message:
For your information, you hear the long beep tone in
the conversation. You can continue your
conversation by dialing 1 after beep tone. Otherwise,
the line will be cut off.
On the Trunk-to-Trunk feature, this message is sent for
asking to dial the telephone number after seizing 2
Example Message:
Please dial telephone number and dial "#".
On the Trunk-to-Trunk, this message is sent when outside
nd
caller cannot seize 2 line.
Example Message:
All lines are busy. Dial "#" then "*" to return to
previous condition.
When system was set to the Night Mode, these message
are sent for each DISA Line.
Example Message:
Thank you for calling, Our office is already closed
today.
This message is sent when nobody answers the call.
Example Message:
Thank you for calling, Our operator are busy now.
Please wait for a moment.
Other Features
When
nd
line.
63