Hotel/Motel Feature; Slt Hold Cancel; Dss Mode Switching - NEC 1232 AK Series Operation Manual

Hotel/Motel Feature

SLT Hold Cancel

The system provides the mode that Single Line Telephone can not use flashing operation. This feature is
useful for prohibiting guest phones' putting call on hold. Check with your supplier for details.

DSS Mode Switching

The Extension paired with a DSS console allows the DSS console to indicate extension status in three modes.
Business, Room Status, and Wakeup modes are available.
To switch to Business
To switch to Room Status
To switch to Wakeup mode:
Note) These function can be assigned to Line Key, One-Touch key, or DLS key. (Function No.24:Business,
No.25:Room Status, No.26:Wakeup) When assigned, the corresponding key will light to indicate the mode.
The mode switching operation is effective only in on-hook status. The default mode is Business.
The LED indication and status in each mode are as follows:
Light
Extinguish
0.1 sec ON/0.1 sec OFF
0.5 sec ON/0.5 sec OFF
0.4 sec ON/0.1 sec OFF
0.1 sec ON/0.1 sec OFF/0.1 sec ON/0.7 sec OFF
1. Lift handset or press
mode:
2. Press
3. Press
4. Press
1. Lift handset or press
mode:
2. Press
3. Press
4. Press
1. Lift handset or press
2. Press
3. Press
4. Press
LED
SPK
ICM
key.
OPAC
key.
.
7 3
SPK
ICM
key.
OPAC
key.
.
7 4
SPK
ICM
key.
OPAC
key.
.
7 5
Business Room Status
Busy Check In
Idle Check Out
DND set Maid Required
MW set Maid in room
Ringing Reserved
-------------- Unavailable
Other Features
.
.
.
Wakeup
Wakeup call set
-------------------------------
No answer to Wakeup call
-------------------------------
-------------------------------
-------------------------------
69