Assembly Instructions - BLADEZ Brazil Owner's Manual

ASSEMBLY INSTRUCTIONS

ATTENTION: The assistance of a second person is required for certain steps of the installation
process when assembling this machine.
STEP 1
1. Take the machine out of its box and make sure that all of the pieces are there.
STEP 2
FITTING THE HANDLE BARS
ATTENTION: The assistance of a second person is REQUIRED for this stage of the assembly.
First, lift the front of the machine and rest it on a prop, such as the packaging that you
have just removed. Bring the front stabilizer bar with wheels (38) to the main body (51)
positioning the wheels at the front of the machine, Fig.3, insert the screws (35), fit the
flat washers (8) and spring washer (9), and tighten securely.
Carry out the same operation to attach the rear stabilizer bar. Lift the rear of the machine
slightly and rest it on a prop, such as the packaging that you have just removed.
Take the rear stabilizer with adjustable feet (36), and line up the dots Fig.3. Insert the
screws (35), fit the washers (8) and nuts (9), and tighten securely.
-
FIG. 3
14