BLADEZ Brazil Owner's Manual page 18

STEP 7
FITTING THE UPPER HANDLEBARS
Take the top left handlebar (3L) (marked with the letter "L").
Insert the top bar onto the bottom left handlebar (13L), lining up the letters (L), Fig.9,
fit the screws (6), and the cap nuts (4) and tighten securely. Now go through the same
procedure for the top right handlebar (3R).
FIG. 9
5
6
4
11L
12
18
-
-
11R
STEP 8
FITTING THE HANDLEBAR SIDE
COVERS
Take the covers (11L and 11R), marked on
the inside with the letter "R", and position
them at the spindle end with the bars on
the right hand side, as shown in Fig.9. Now
use screws (12) to attach them.
Carry out the same procedure at the other
end of the bar using the covers (11L and
11R) marked on the inside with the letter
"L".