Mode Configuration; Mode Overview; Input Type; Input Type Setup - Classe Audio SSP-25 Owner's Manual

Preamplifier/surround sound processor
Table of Contents

Advertisement

1.
MENU
2.
/\ (the UP arrow key)
3.
> (the RIGHT arrow key)
4.
\/ (the DOWN arrow key)
5.
< (the LEFT arrow key
6.
ENTER
It's going to be easy, and it's going to be fun.
5.3

MODE Configuration

5.3.1

MODE overview

Press the "MENU" key to bring up the first display. The Display shows "Main MENU - Mode Setup." Press the
"ENTER" button to reveal "Mode Setup" in the first line and "Stereo Sur(round) setup" in the second. If you press either
the < or the > button Stereo Sur setup will change to "Dolby Dig(ital) setup." Pressing either key again will return to the
previous selection. "Stereo Sur setup" allows you to set up the general acoustical atmosphere and the over-all system
balance for Stereo Surround playback.
5.3.2

INPUT Type

Press ENTER to select "Stereo Sur setup."
"Stereo Sur setup" moves up one line and "Type: Natural" appears on the lower line. (If this effect has previously been
changed then the selected effect will be displayed instead of Natural). Pressing the /\ or \/ key cycles through the four
sonic characteristics: Natural, Concert, Stadium and Club. You can be listening to a CD or DVD in Stereo Surround
Mode while you are making this setting and you will be able to immediately hear the affect. When you have arrived at a
setting you want and it is in the display, merely press the > or < key to store the setting and go back one menu step.
Press either the > or the < key until "Center: +0 dB" appears. (If this effect has previously been changed then the
selected level will be displayed instead of 0). By pressing the /\ or \/ keys you can increase or decrease the level of the
Center speaker in 1 dB steps, up to +6 or –6 dB. You can be listening to a CD or DVD in Stereo Surround Mode while
you are making this setting and you will be able to immediately hear the affect. When you have arrived at a setting you
want and it is in the display, merely press the > or < key to store the setting and go back one menu step.
Press either the > or the < key until "Surround: +0 dB" appears. (If this effect has previously been changed then the
selected level will be displayed instead of 0). By pressing the /\ or \/ keys you can increase or decrease the level of the
Surround speakers in 1 dB steps, up to +6 or –6 dB. You can be listening to a CD or DVD in Stereo Surround Mode
34

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents