Safety Information; Ce Notice - Classe Audio SSP-25 Owner's Manual

1) To prevent fire or shock hazard, do not expose the SSP-25 to water or moisture.
2) Do not place the SSP-25 close to any heat-producing device such as a radiator, stove, etc..
3) Connect the SSP-25 only to an AC source of the proper voltage. The shipping container and the rear panel
serial number tag will stipulate the proper voltage. Use of any other voltage will almost certainly damage the
unit and will void the warranty.
4) Do not open the SSP-25 for any reason, as there are no user serviceable parts inside. An open unit,
particularly if it is still connected to an AC source, presents a potentially lethal shock hazard. Refer all
questions to authorized service personnel only.
5) If the SSP-25 will be out of use for an extend period of time (vacation, etc.), unplug the power cord from the
AC source to prevent any chance of problems from a voltage surge.
All of us at Classé take extreme care to insure that your purchase will become a prized investment. We are proud to
inform you all Classé Audio components have been officially approved for the European Community (CE) mark under
CE Certificate Number C401CLA1.MGS granted on 18 July, 1996.
This means that your Classé product was subjected to the most rigorous manufacturing and safety tests in the world.
The CE mark certifies that your purchase meets or exceeds all European Community requirements for unit-to-unit
consistency and consumer safety.
The SSP-25 is manufactured under license from Dolby Laboratories Licensing Corporation. It is additionally licensed
under one or more of the following patents: U.S. number 3,959,950, Canadian numbers 1,004,603 and 1,037,877.
Additionally, the SSP-25 is manufactured under license from Digital Theater Systems, Inc.
Dolby® Pro Logic®, and Dolby Digital® are registered trademarks of Dolby Laboratories Licensing Corporation.
DTS® is a registered trademark of Digital Theater Systems, Inc.

Safety Information

CE Notice

2