Zero Configuration Setup - D-Link DCS-5010L User Manual

Section 2 - Installation

Zero Configuration Setup

If you have a mydlink-enabled Cloud Router, you can take advantage of Zero Configuration Setup. Zero Configuration
automatically configures your camera's settings for you and adds the camera to your mydlink account automatically without
the need to run the Setup Wizard.
Step 1 - Connect the Ethernet Cable and Power Cable
Use the included Ethernet cable and plug it into the camera. Plug the other
end into an available (LAN) port on your D-Link Cloud Router. Connect the
power adapter into the power port on the back of the camera.
Note: If you wish to use your camera wirelessly, you will be able to remove the
cable after the Zero Configuration Setup is complete and place the camera within
your wireless network. The router will configure the camera's wireless settings
automatically.
Step 2 - Attach the External Power Adapter
Plug the power adapter into a wall outlet or surge protector.
D-Link DCS-5010L User Manual 10