Zero Configuration Setup - D-Link DCS-960L User Manual

Hd ultra-wide view wi-fi camera

Hide thumbs Also See for DCS-960L:

Table of Contents

Section 2 - Installation

If you have a mydlink-enabled Cloud Router, you can take advantage of Zero Configuration Setup. Zero Configuration

automatically configures your camera's settings for you, and adds the camera to your mydlink account automatically. This

type of setup allows you to set up your camera by simply plugging it in and connecting it to your router.

Connect your camera to your mydlink-enabled Cloud Router and Zero Configuration will automatically configure your

DCS-960L and add the camera to your mydlink account. After the short time it takes to do this you can remotely access your

camera from the website (http://www.mydlink.com) to manage and monitor your DCS-960L.

Plug in the External Power Adapter

Connect the power adapter to the microUSB port on the back of the camera.

Plug the power adapter in to a wall outlet.

Press the WPS button on your camera

Press and hold the WPS button for three seconds. The blue WPS status LED

will start blinking.

Press the WPS button on your Cloud Router

Press the WPS button on your router within 60 seconds. The WPS button

is usually on the side or back of your Cloud Router. The DCS-960L will

automatically create a secure wireless connection to your router and reboot.

When it has successfully connected, the Power LED will be lit green and the

Direct LED will be turned off.

D-Link DCS-960L User Manual

Zero Configuration Setup

Table of Contents