Zero Configuration Setup - D-Link DCS-5222LB1 User Manual

Section 1 - Product Overview
If you have a mydlink-enabled Cloud Router, you can take advantage of Zero Configuration. Zero Configuration automatically
configures your camera's settings for you, and adds it to your mydlink account automatically. This type of setup allows you to
set up your camera by simply plugging it in and connecting it to your router.
Connect your camera to your mydlink-enabled Cloud Router and Zero Configuration will automatically configure your
DCS-5222LB1 and automatically add the camera to your mydlink account. After the short time it takes to do this you can
remotely access your camera from the www.mydlink.com website to manage and monitor your DCS-5222LB1
Connect the Ethernet Cable
Use the included Ethernet cable and plug it into the camera. Plug the other
end into an available port on your router. If you wish to use your camera
wirelessly, you will be able to remove the cable after Zero Configuration
Setup is complete.
Attach the External Power Adapter
Connect the power adapter to the power connector on your camera, then
plug the power adapter into a wall outlet.
D-Link DCS-5222LB1 User Manual

Zero Configuration Setup

11