Image Setup - D-Link DCS-5010L User Manual

Section 3 - Configuration
This section allows you to configure the image settings for your camera.
Enable If you have lights flickering in your camera video, try enabling
Antiflicker: antiflicker. Otherwise, you should leave this disabled.
Flip Image: Select this box to vertically flip the video.
Mirror: Horizontally flip the video.
Note: If the camera is installed upside down, Flip Image and Mirror
should both be checked
Brightness Allows you to adjust the brightness level. Select a setting between
Control: -5 and +5.
Contrast Allows you to adjust the contrast level. Select a setting between -5
Control: and +5.
Saturation Allows you to adjust the saturation level. Select a setting between -5
Control: and +5.
D-Link DCS-5010L User Manual

Image Setup

27 27