System - D-Link DCS-5010L User Manual

Section 3 - Configuration
This section allows you to save and restore your configuration, restore the factory settings, and/or restart the camera.
Save To Local Click the Save Configuration button to save the current camera
Hard Drive:
configuration to your local PC.
Load From To load a previously saved configuration, click the Browse...
Local Hard button, select your saved configuration file, then click the Restore
Drive: Configuration From File button.
Restore Click the Restore Factory Defaults button to reset all settings back
To Factory
to the factory defaults. Please note that this will erase any changes
Default:
you have made to the settings of the camera.
Reboot The Click the Reboot the Device button to reboot the camera.
Device:
D-Link DCS-5010L User Manual

System

39 39