System Requirements; Product Setup; Zero Configuration Setup - D-Link DCS-5222L Quick Installation Manual

SySTEm rEQUIrEmENTS

• a router (a d-link cloud Router is recommended)
• a broadband Internet connection
• an e-mail account (required to register for mydlink service)
• computer with:
• microsoft Windows
• pc with 1.3 GHz or above and at least 128 mB Ram
• Internet explorer 7, Firefox 12, safari 4, or chrome 20 or higher version with java installed and
enabled
• existing 10/100 ethernet-based network or 802.11g/n wireless network

PrODUCT SETUP

Zero CoNfiguraTioN seTuP

If you have a D-Link Cloud Router, you can take advantage of Zero configuration setup. this
feature automatically configures your camera's settings for you and adds it to your mydlink account
automatically. If you do not have a d-link cloud Router, you can use the setup Wizard to install and
configure your camera, as described in the following section.
DCS-5222L
DCs-5222l
®
8/7/Vista/Xp, or mac with os X 10.6 or higher
Step 1:
connect the power cable and ethernet cable to your cloud camera.
Step 2:
connect the other end of the ethernet cable to your d-link cloud
Router and connect the camera's power adapter to a power outlet.
Step 3:
From any computer, open a web browser, go to
http://www.mydlink.com and log in to your account.
click on the device name when the new device notification appears
to add the camera to your account.
If you wish to connect your camera to your router with a wireless
connection, you can simply disconnect the ethernet cable and move
the camera to its intended location.
3