Zero Configuration Setup; Product Setup; System Requirements - D-Link DCS-6004L Quick Installation Manual

PRODUCT SETUP

SYSTEM REQUIREMENTS

• A router (a D-Link Cloud Router is recommended)
• A broadband Internet connection
• An e-mail account (required to register for mydlink service)
• Computer with:
• Microsoft Windows® 8/7/Vista/XP, or Mac with OS X 10.6 or higher
• PC with 1.3 GHz or above and at least 128 MB RAM
• Internet Explorer 7, Firefox 12, Safari 4, or Chrome 20 or higher version with Java installed and
enabled
• Existing 10/100 Ethernet-based network or 802.11g/n wireless network

ZERO CONFIGURATION SETUP

If you have a D-Link Cloud Router, you can take advantage of Zero Configuration Setup. This
feature automatically configures your camera's settings for you and adds it to your mydlink account
automatically. If you do not have a D-Link Cloud Router, you can use the Setup Wizard to install and
configure your camera, as described in the following section.
DCS-6004L / DCS-6005L
Step 1:
Remove the camera housing by squeezing the housing release
buttons on both sides of the came
Step 2:
Connect the included Ethernet cable to the network cable connector
located inside of the camera and attach it to the network.
Step 3:
If you are going to power the device using Power over Ethernet, you
can skip this step and continue with the configuration of the device.
Otherwise, attach the external power supply to the DC power input
connector located on the inside of the camera and connect it to your
wall outlet or power strip. Power is confirmed when the green LED
Power Indicator is lit.
Step 4:
Reattach the camera housing by lining up the housing so that the
access port on the housing matches the access port on the camera
base. Firmly push down until the camera housing snaps back onto
the camera base.
3